穿刺测试FTMS 101C / MIL STD 3010C Method 2065

Test or certification item 测试或认证名称: FTMS 101C / MIL STD 3010C Method 2065

performs puncture test 穿刺测试

Test orcertification info 测试和认证相关内容:

Scope:
This puncture test measures the load required to punctureflexible sheet materials. It is used to simulate everyday puncture failure oras a control method on sheeting and film.
适用范围:该刺穿试验测量刺穿柔性片材所需的载荷。它是用来模拟日常穿刺故障或作为一种质量控制方法对薄片和薄膜。

Test Procedure:
The puncture fixture is attached to the compression plate ofan Instron universal testing machine. A 50 x 50 mm (2" x 2") s sample is clamped into the test future. The puncture tool is pushedthrough the film at a relatively slow speed. The load at rupture is recorded.

Refer products 涉及产品: 防静电隔离袋

Lead time 周期:  常规服务 regular service 25工作日 working days （ URGENT service, to be confirm, 加急服务待定）

Sample size 送样规格:  

(10)Specimens are tested per the method, (5) on each side. 

Pleasemark on material inside and outside and supply enough material for (12)specimens at 3 inch x 3 inch.   

A 50 x 50 mm (2" x 2") sample is required.

Safety Data Sheets (SDS) are required for the materials to be tested.被测试材料需要安全数据表(SDS)